| Re: ADC zu RS232 Kategorie: IDE (von Tobias - 18.07.2016 0:00) | |
|
Als Antwort auf ADC zu RS232 von Bram - 17.07.2016 23:16
| |
|
> What is Wrong ? > > Thanks Bram. > > > SPI_Disable(); > > Serial_Init(PORT,SR_8BIT|SR_1STOP|SR_NO_PAR,SR_BD19200); > > // Read ADC and transfer the data to the Serial Port > > while (1) > { > ADC_SetInt(40,1); > ADC_StartInt(); > Serial_WriteText(0,"ADC1:rn"); > Serial_Write(0,ADC_ReadInt()); > Serial_Write(0,(13)); > AbsDelay(1000); > } > > } Dear Bram, I didn't checked it on my MEGA, but the first failure which I see is that you must write the 40 as a HEX-value: 0x40! Only "40" is a decimal-value. ADC_SetInt(0x40,1); And additional: I never tested the ADC in Interrupt-mode, but I think you must also activate the ADC-IRQ (INT_ADC) and use it before you can read the value. Please check this link: Interrupt in the manual Best regards, Tobias | |
Antwort schreiben Antworten: | |
Zur Übersicht - INFO - Neueste 50 Beiträge - Neuer Beitrag - Suchen - Zum C-Control-I-Forum - Zum C-Control-II-Forum