Kommentar: Einfügen von HTML im Kommentar: Link einfügen: <a href="LINKURL" target="_blank">LINKTITEL</a> Bild einfügen: <img src="BILDURL"> Text formatieren: <b>fetter Text</b> <i>kursiver Text</i> <u>unterstrichener Text</u> Kombinationen sind auch möglich z.B.: <b><i>fetter & kursiver Text</i></b> C Quellcode formatieren: <code>Quellcode</code> BASIC Quellcode formatieren: <basic>Quellcode</basic> (Innerhalb eines Quellcodeabschnitts ist kein html möglich.) Wichtig: Bitte mache Zeilenumbrüche, bevor Du am rechten Rand des Eingabefeldes ankommst ! -> I > Dear Bram, > > only generally: > Your information is somewhat poor. You should describe something more which does > not work if you expect help. It would also be nice if you would give feedback once > on messages whether it helped you or not, for example whether the DA converter > is working now. > > I can compile the program anyway. What is not working? > > Greetings, Tobias > > > > > Programme not running what did I do wrong? > > > > /*------------------------------------------------------ > > Program: Dynamic Shock Absorber Test > > > > Unit: C_Control PRO Mega 32 > > IDE: C_Control PRO IDE > > > > Function: > > > > Reading from a Rotary Encoder > > Trig0 = 360 grd > > Trig1 = 360/200 > > > > input: Trig0,Trig1 > > input: AD0,AD1,AD3 > > output: DO1,DO2: Relais sturing > > output: D/A (later ?) > > > > Input and Output is done via RS232 interface > > > > /*---------------------------------------------------*/ > > > > // Declaratie Poorten Interupt ?? > > > > // ?? #define EXTINT 26 // Externe ingang pin nr PD2 > > // ?? #define INTMODE 3 // Rising Edge > > // ?? #define EXTINT 27 // Externe ingang pin nr PD3 > > // ?? #define INTMODE 3 // Rising Edge > > > > #define LF 0x0A > > #define CR 0x0D > > /*----------------------------------------------------*/ > > > > void Pulse0(int Trig0) > > > > { > > // Ext_IntDisable(26); ?? > > // Set Data Register for Start place (later) > > Serial_WriteText(0,"Trig0"); // Test > > } > > > > void Pulse1(int Trig1) > > > > { > > // Ext_IntDisable(27); ?? > > // Increment Data Register > > // Store data (Register+1)from ADC > > Serial_WriteText(0,"Trig1"); // Test > > } > > > > > > void main(void) > > { > > int Trig0; > > int Trig1; > > int i; > > int n; > > byte c; // Variables declaration > > byte Buf_Index; > > word ADC_Value; > > char ADC_String[10]; > > > > Serial_Init(0,SR_8BIT|SR_1STOP|SR_NO_PAR,SR_BD9600); > > ADC_Set(ADC_VREF_VCC,0); > > > > Irq_SetVect(INT_0,Trig0); > > Irq_SetVect(INT_1,Trig1); > > > > Ext_IntEnable(0,1); > > Ext_IntEnable(1,1); > > > > Port_DataDirBit(19,1); // Start Stop Freq Reg. > > Port_DataDirBit(20,1); // Res. > > > > while(1) > > { > > c=Serial_ReadExt(0); > > if(c==65) // A > > { > > Port_WriteBit(19,PORT_ON); > > } > > if(c==67) // C > > { > > Port_WriteBit(19,PORT_OFF); > > } > > > > // Stop Interupt 1 en 2 > > // Read Register from 0-200 (later) > > > > if(c==63) // Only for test > > {for (i=0;i<3;i++) > > { > > ADC_Set(0x40,i); > > Str_WriteInt(ADC_Read(),ADC_String,0); // 0 RPM 0-5 Volt > > Serial_WriteText(0,ADC_String); // 1 Force 0-5 Volt > > Serial_WriteText(0,":"); // 2 Temp > > AbsDelay(5); > > Serial_Write(0,CR); > > } > > Buf_Index=0; // Clear buffer > > } > > // Set Interup on > > > > } > > } > > > > Please help. > > > > > > Thanks Bram
